The classic replacement bulb for older 120 V pool lights: Satco’s 400 W BR40 lamp with an E26 base, 4,000 lumens and 2,000 hours. The title says fluorescent; the specifications describe an incandescent lamp.
Satco’s S7006 is a 120 V, 400 W BR40 pool lamp with a frosted finish and an E26 medium base, rated at 4,000 lumens and 2,000 hours at 2,700 K.
A listing to read twice
The title calls it a fluorescent pool lamp. Every figure in the table describes an incandescent bulb.
Running cost
At 400 W, an evening of four hours uses 1.6 kWh. A 40 W LED doing a similar job uses a tenth of that.
Safety
Turn off the breaker before opening a pool light, match the voltage of the existing circuit exactly, and have an electrician do niche and junction box work under NEC Article 680.
Prices quoted in this text were read on November 2, 2026. The live price is at the top of the page.
Declared figures, and the gaps between them
Strengths
About $16
Direct replacement for a 120 V incandescent pool bulb
Warm 2,700 K light
Compromises
400 W draw, ten times an LED of similar output
2,000-hour life
Lamp type stated two ways
Specifications
Voltage
120 V
Power
400 W
Shape and base
BR40, E26 medium
Light
2,700 K, 4,000 lm
Life
2,000 hours
Type
Fluorescent in the title; incandescent in the table
Model
S7006
Amazon reference
B005CV49JU
The two closest units on price
Same aisle, nearest cost — what else that money keeps clear.
The title says fluorescent. The specifications give 400 W, 2,700 K and a 2,000-hour life, which describe an incandescent lamp.
Will an LED bulb fit instead?
The Life-Bulb 120 V LED uses the same E26 base and draws under 40 W. Check the fixture’s size and voltage.
Our score
7.4/ 10
The cheap like-for-like bulb. An LED retrofit costs more once and far less to run.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $16 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 2, 2026.
Who should pick this one, among pool equipment
An owner of an older 120 V fixture who wants the original type of bulb back.
What buyers actually choose
Amazon reports what buyers took in the month before this page was last checked: at least 100.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Sources
Specifications: the Amazon.com listing of this product, read for a US address, and the maker’s documents where they exist. Price: the Amazon.com price on the day it was read, with Keepa for the live figure where one is shown. Score: Amazon.com buyer ratings, adjusted as explained in our method.
RGBW, 50 W · 120 V AC to 12 V DC SELV · fits 10 in niches (Pentair, Hayward, Sta-Rite, Jacuzzi, Jandy) · 100 ft cord · up to 10 lights
HQUA’s PN01DC: an RGBW 10 in niche light with a control unit that converts 120 V AC to 12 V DC, a 100 ft cord and sync for up to 10 lights. About 415 ratings at 4.3.
Best for: An in-ground pool owner with one or more 10 in niches who wants synchronized color.
12 V AC/DC · 50 W, 5,000 lm · OSRAM chips · E26 · 3.74 x 4.72 in · fits Hayward Astrolite, Pentair Amerlite and more
A 12 V LED replacement bulb that names the fixtures it fits: Hayward Astrolite, Pentair Amerlite 784-791, Sta-Rite SwimQuip TM, Jacuzzi Full Moon and Anthony housings.
Best for: An owner of a named 12 V Hayward or Pentair housing who wants a drop-in LED.
AC 12 V · 45 W, 4,500 lm · 7 colors, 2 modes · IP68, epoxy-filled · 4.9 ft cord · needs a 120 V transformer ≥ 60 W per light
A surface-mounted color light, not a niche replacement: 11.6 in across, 45 W on AC 12 V, IP68 with epoxy filling and a 4.9 ft cord. It needs a 120 V-to-12 V transformer of 60 W or more per light.
Best for: A pool or spa owner adding a wall-mounted color light where no niche exists.