A 12 V LED replacement bulb for sealed pool fixtures: 50 W, 5,000 lumens, 6,500 K. The seller says plainly it is not for 120 V and is not waterproof on its own.
A 12 V, 50 W E26 LED with 36 chips and a cooling fan, rated at more than 5,000 lumens at 6,500 K, sold as a replacement for 200 to 800 W halogen bulbs.
What the seller warns
It is not suitable for 120 V, it cannot dim, and it is not waterproof: it goes inside the pool light’s sealed housing. Test it in a regular socket on AC before installing, the seller says.
Fit
At 3.74 by 4.84 in, check the housing size first.
Safety
Turn off the breaker before opening a pool light, match the voltage of the existing circuit exactly, and have an electrician do niche and junction box work under NEC Article 680.
Prices quoted in this text were read on November 2, 2026. The live price is at the top of the page.
Declared figures, and the gaps between them
Strengths
About $36
Honest about its limits
Replaces 200-800 W halogen, per the seller
Compromises
12 V circuits only
Must fit inside the existing sealed housing
About 100 ratings
Specifications
Voltage
12 V; not suitable for 120 V
Power
50 W, 36 LEDs, fan
Light
5,000 lm, 6,500 K daylight
Base
E26
Size
3.74 x 4.84 in
Water
Moisture-resistant, not waterproof; must go in a waterproof housing
Dimming
None
Amazon reference
B0D93J8T91
The two closest units on price
Same aisle, nearest cost — what else that money keeps clear.
No. The seller states the bulb is not suitable for 120 V.
Is it waterproof?
No. It is moisture-resistant and must be installed inside a waterproof lamp housing.
Our score
7.5/ 10
Good value for 12 V fixtures. Measure the housing before buying, as the seller asks.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $36 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 2, 2026.
Who should pick this one, among pool equipment
An owner with a 12 V pool light who wants a cheap, bright white LED.
What buyers actually choose
Amazon reports what buyers took in the month before this page was last checked: at least 50.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Sources
Specifications: the Amazon.com listing of this product, read for a US address, and the maker’s documents where they exist. Price: the Amazon.com price on the day it was read, with Keepa for the live figure where one is shown. Score: Amazon.com buyer ratings, adjusted as explained in our method.
RGBW, 50 W · 120 V AC to 12 V DC SELV · fits 10 in niches (Pentair, Hayward, Sta-Rite, Jacuzzi, Jandy) · 100 ft cord · up to 10 lights
HQUA’s PN01DC: an RGBW 10 in niche light with a control unit that converts 120 V AC to 12 V DC, a 100 ft cord and sync for up to 10 lights. About 415 ratings at 4.3.
Best for: An in-ground pool owner with one or more 10 in niches who wants synchronized color.
12 V AC/DC · 50 W, 5,000 lm · OSRAM chips · E26 · 3.74 x 4.72 in · fits Hayward Astrolite, Pentair Amerlite and more
A 12 V LED replacement bulb that names the fixtures it fits: Hayward Astrolite, Pentair Amerlite 784-791, Sta-Rite SwimQuip TM, Jacuzzi Full Moon and Anthony housings.
Best for: An owner of a named 12 V Hayward or Pentair housing who wants a drop-in LED.
12 V via controller from 120 V · 20 W · fits 6 in wet niche · remote, controller and app · 50 ft cord · IP68 · 3-year warranty
A complete 6 in niche replacement: a sealed stainless steel color light, a controller that steps 120 V down to 12 V, a 50 ft cord, app control and a 3-year warranty.
Best for: An owner of a spa or small pool with a 6 in niche who wants color and app control.