A 10 in wet niche replacement with a separate outdoor controller that receives the remote signal, stepping 120 V down to 12 V. Mopzlink says it uses 14% of a 500 W bulb’s energy.
A solid sealed light that replaces the whole fixture in a 10 in wet niche without a ring, gasket or housing. The controller converts 120 V to 12 V.
Control
An outdoor controller with an integrated receiver, plus remote and app, for seven solid colors and dynamic effects.
Claims
IP68, 50,000 hours, and 14% of a 500 W bulb’s energy. The table gives 54 W, which matches that claim within reason.
Safety
Turn off the breaker before opening a pool light, match the voltage of the existing circuit exactly, and have an electrician do niche and junction box work under NEC Article 680.
Prices quoted in this text were read on November 2, 2026. The live price is at the top of the page.
Declared figures, and the gaps between them
Strengths
Controller receiver avoids water and metal signal loss
Low voltage at the light
10 in niche size
Compromises
3.8 stars from about 160 ratings
About $229
Cord length not stated in the bullets
Specifications
Fit
10 in wet niche; replaces the whole fixture, no housing, ring or gasket
Voltage
120 V to 12 V in the controller
Power
54 W, per the table
Colors
7 solid, dynamic effects
Control
Remote, controller, app
Rating
IP68, 50,000 h
Warranty
2 years
Amazon reference
B0CT274GFZ
The two closest units on price
Same aisle, nearest cost — what else that money keeps clear.
Mopzlink says remote signals are lost through water and metal casings, so the receiver sits in an outdoor controller instead.
How much energy does it save?
Mopzlink says it uses 14% of the energy of a 500 W incandescent bulb.
Our score
7.1/ 10
A reasonable 10 in color light. The HQUA rates better and includes a 100 ft cord.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $229 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 2, 2026.
Who should pick this one, among pool equipment
An in-ground pool owner replacing a 10 in fixture with color LED.
Sources
Specifications: the Amazon.com listing of this product, read for a US address, and the maker’s documents where they exist. Price: the Amazon.com price on the day it was read, with Keepa for the live figure where one is shown. Score: Amazon.com buyer ratings, adjusted as explained in our method.
RGBW, 50 W · 120 V AC to 12 V DC SELV · fits 10 in niches (Pentair, Hayward, Sta-Rite, Jacuzzi, Jandy) · 100 ft cord · up to 10 lights
HQUA’s PN01DC: an RGBW 10 in niche light with a control unit that converts 120 V AC to 12 V DC, a 100 ft cord and sync for up to 10 lights. About 415 ratings at 4.3.
Best for: An in-ground pool owner with one or more 10 in niches who wants synchronized color.
12 V AC/DC · 50 W, 5,000 lm · OSRAM chips · E26 · 3.74 x 4.72 in · fits Hayward Astrolite, Pentair Amerlite and more
A 12 V LED replacement bulb that names the fixtures it fits: Hayward Astrolite, Pentair Amerlite 784-791, Sta-Rite SwimQuip TM, Jacuzzi Full Moon and Anthony housings.
Best for: An owner of a named 12 V Hayward or Pentair housing who wants a drop-in LED.
12 V only · 50 W, 5,000 lm, 6,500 K · E26 · 3.74 x 4.84 in · not waterproof, needs a sealed housing · no dimming
A 12 V LED replacement bulb for sealed pool fixtures: 50 W, 5,000 lumens, 6,500 K. The seller says plainly it is not for 120 V and is not waterproof on its own.
Best for: An owner with a 12 V pool light who wants a cheap, bright white LED.