XtremepowerUS rates the 75117 at 3/4 HP, 2.8 A and 3,450 rpm on 115 V, with 2,400 GPH. It has 1.5 in NPT ports, an adapter set, a clear-lid strainer basket and a rain shell over the motor.
Where it fits
Above-ground pools to about 10,000 gallons, spas and water features. At 2,400 GPH it turns a 10,000-gallon pool over in a little over 4 hours at zero head; real flow through a filter is lower.
What to check
The listing’s last bullet describes plugging in and setting a program, which suggests a timer, but none is in the specifications.
Safety
Wire a 230 V pump to its own GFCI-protected circuit, prime the pump with water before every first start, and have an electrician do hard-wired work.
Prices quoted in this text were read on November 2, 2026. The live price is at the top of the page.
Declared figures, and the gaps between them
Strengths
About $100
Rain shell over the motor
115 V plug-in
About 1,250 ratings at 4.1
Compromises
3/4 HP is small for anything over about 10,000 gallons
The bullets mention a timer the pump does not clearly have
Aluminum listed as material, plastic housing in practice
Specifications
Power
3/4 HP, 115 V, 2.8 A, 3,450 rpm
Flow
2,400 GPH (40 gpm)
Max head
32 ft, per the table
Connections
1.5 in NPT, adapter set included
Basket
Clear lid, spacious strainer
Weather
Protective rain shell
Weight
13 lb
Amazon reference
B008FDJUNW
The two closest units on price
Same aisle, nearest cost — what else that money keeps clear.
One bullet talks about setting a program and running automatically, but no timer appears in the specifications. Plan on an outdoor timer unless the seller confirms one.
Can it lift water to a sand filter?
The table gives 32 ft of maximum head, enough for a typical above-ground sand filter at modest flow.
Our score
7.5/ 10
A cheap, sensible above-ground pump. Check whether you need a separate timer, because the listing is unclear.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $100 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 14, 2026.
Who should pick this one, among pool equipment
An above-ground pool owner replacing a worn small pump on 1.5 in fittings.
What buyers actually choose
Amazon reports what buyers took in the month before this page was last checked: at least 100.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Sources
Specifications: the Amazon.com listing of this product, read for a US address, and the maker’s documents where they exist. Price: the Amazon.com price on the day it was read, with Keepa for the live figure where one is shown. Score: Amazon.com buyer ratings, adjusted as explained in our method.
1 HP single speed · 230 V · 75 GPM in the table · swing-away knobs · extra-large basket · 4-bolt access
The pump most US pool stores stock: Hayward’s Super Pump, 1 HP, from what Hayward calls the world’s best-selling medium-head pump family. About 1,290 ratings at 4.5.
Best for: An in-ground pool owner who wants the most familiar replacement pump.
1 HP single speed · 230 V · 70 GPM in the table · 1.5 x 2 in unions · 50 psi max · 1/4-turn lid · 4-bolt access
Hayward’s entry in-ground pump: a 1 HP MaxFlo LX with 1.5 by 2 in union connections, a quarter-turn strainer lid and 4-bolt service access, tested to 50 psi.
Best for: An in-ground pool owner replacing an old Hayward MaxFlo with the same footprint.
Dual speed, 3,450/1,720 rpm · 230 V · 5,820-5,850 GPH, 97 GPM max · 1.5 in NPT · UL · 1.75 HP in the bullets, 1.15 in the table
A two-speed 230 V pump for smaller in-ground pools and spas on 1.5 in plumbing. The bullets say 1.75 HP and the table says 1.15 HP; only four ratings so far.
Best for: A small in-ground pool or spa on 1.5 in plumbing that wants a low speed.