From a $74 Intex pump to a 425 sq ft tank · review
Doheny’s Pool Pro 70 sq ft, 1 HP review
A real tank filter for above-ground pools: 70 sq ft of non-woven cartridge on a base with a 1 HP pump, pressure gauge and air release, CSA and ETL certified, at 115 V.
Doheny’s pairs a thermoplastic tank holding a 70 sq ft non-woven cartridge with a 1 HP pump on a common base. It runs at 115 V and comes with a 1.5 in threaded connector and the fittings.
The gauge
A built-in pressure gauge and air release valve are what separate a tank filter from a frame-pool pump. When pressure climbs, the cartridge needs cleaning.
What the listing omits
No flow rate and no maximum pool size are stated. Doheny’s also warns that the filter-only version lacks the pump and base.
Safety
Plug pool equipment into a GFCI-protected outlet, keep the cord off wet ground, and follow the maker’s distance rules between the pump and the water.
Prices quoted in this text were read on November 2, 2026. The live price is at the top of the page.
Declared figures, and the gaps between them
Strengths
A 70 sq ft cartridge lasts far longer between cleanings than Type A or B
Pressure gauge tells you when to clean
CSA and ETL listed
Compromises
About $485
Filter-only purchases exclude the pump and base, so check the version
No flow rate in the bullets
Specifications
Filter area
70 sq ft, non-woven cartridge
Pump
1 HP, 115 V / 60 Hz
Connection
1.5 in threaded
Gauges
Pressure gauge, air release valve
Certification
CSA and ETL, stated
Weight
50 lb
Amazon reference
B086H2FPRY
The two closest units on price
Same aisle, nearest cost — what else that money keeps clear.
Far less often than a Type A or B. Clean it when the pressure gauge reads about 8 to 10 psi above its clean reading, the usual rule for cartridge filters.
Does it include the pump?
This listing is the system with a 1 HP pump. Doheny’s notes that filter-only purchases do not include the pump, base or connection.
Our score
7.7/ 10
The step from frame-pool pumps to a proper filter. The pressure gauge alone changes how you maintain the pool.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $485 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 2, 2026.
Who should pick this one, among pool equipment
A 15 to 24 ft above-ground pool owner tired of changing small cartridges every two weeks.
Sources
Specifications: the Amazon.com listing of this product, read for a US address, and the maker’s documents where they exist. Price: the Amazon.com price on the day it was read, with Keepa for the live figure where one is shown. Score: Amazon.com buyer ratings, adjusted as explained in our method.
In-ground single-element cartridge filter · knob-fastened head, no clamps · gauge and air relief · 1.5/2 in FIP, 2 in SKT
Hayward’s in-ground cartridge filter: a single large element, a head that fastens with one knob, and 1.5 in, 2 in or 2 in slip connections. About 960 ratings at 4.6.
Best for: An in-ground pool owner replacing a worn cartridge filter with a proven one.
1,000 GPH · pools up to 6,000 gal · 2-10 h timer · cartridge gauge · 120 V · 2-year warranty
Intex’s most bought filter pump: 1,000 GPH for pools up to 6,000 gallons, with a 2 to 10 hour timer and a gauge that turns green, yellow and red as the cartridge clogs.
Best for: The owner of a 10 to 15 ft frame pool whose original 530 GPH pump is not keeping up.